VELOCITY Specifications

Specifications

Space & Weight:

•  Weight: 16,000 lbs.
•  Overall dimensions: 31' 2" long x 8' 9" wide x 7' 10" high (including input, output and swing-out conveyors)

Spindles:

• One back gauging spindle: 6.5 HP at 3450 RPM
• Two pre-grinding spindles for waste material removal: 6.5 HP at 3450 RPM
• One servo-driven shaping spindle: 6.5 HP at 3450 RPM
• Six polishing spindles: 2 HP at 1710 RPM
• Two chamfer spindles: 2 HP at 1710 RPM
• Center water feed on all spindles except servo shaping spindle
• Internal air purge on all spindles to prevent bearing and seal contamination
• Tool adapters for 6" tools on all polishing spindles

Pneumatic Hold-Downs:

• Nineteen 2" bore x 4" stroke heavy-duty triple rod air cylinders with non-marring urethane rollers in stainless steel yokes
• Built-in skew to minimize stone shifting

Powered Belt Conveyor Drive:

• 2' wide x 17' long non-slip, non-marring conveyer belt
• 1 HP duty AC motor with variable-frequency drive speed control (2" to 40" per minute)

Input/Output Conveyors:

• Input conveyer: 72" long x 31" wide with “all way” rollers and non-marring guide fence
• Output conveyer: 72" long x 31" wide with “all way” rollers
• Swing-out support conveyer: provides overhanging stone support from 9" to 36" from outside edge of conveyer belt

Construction:

•  Frame: heavy-duty structural steel/plate construction, stress relieved and precision machined
•  Spindle bridge: rigid torsion box design, stress relieved and precision machined

Capabilities: Edge Types:

• Pre-programmed profiles, including flat edge, flat edge with radius top and bottom, bullnose, half-bullnose, and other convex shapes for 2 cm (3/4") to 6 cm (2-3/8") stone
• Top and bottom chamfer of flat edges at 45 degrees to 1/8"

Stone Capacity:

• Piece length: 2' to 12'
• Piece thickness: 2 cm to 6 cm (3/4" to 2-3/8"); 6 cm with diamond tooling only
• Minimum 8" spacing between work pieces

Control System:

• Color touch-screen
• Operator-programmed parameters include but are not limited to: pre-programmed profile configurations for varying stone thicknesses, conveyer speed, spindle motor selection, spindle stagger, hold-down timing, on/off functions, pause process/restart, production data management, user-friendly help screens, on-screen diagnostics, maintenance schedule management, and setup screens