Selected Specifications

JAGUAR 3000/4000 Automated Gantry Saw/Stone Profiling Saw

• Weight: 7,800 lbs.
• Installed dimensions: 20'-5" long x 20'-11" wide x 12'-2" high
• Main motor size: 30 HP AC across the line soft starter, TEFC Motor
• Main drive system: Belt drive
• Arbor: Heavy duty spiral bevel gearbox with tapered roller bearings
• Track type wire/hose distribution system for cross head travel
• Cross head travel distance: 139" travel
• Cross head travel drive: Rack and pinion
• Cross head travel speed: 1-40 FPM, variable speed AC drive, TEFC motor
• Cross head travel guides: Dual round linear ways with double-length precision slide bearings, top and bottom
• Raise and lower: 18"
• Raise and lower drive: variable speed machine screw with brake for precision positioning 0-120 IPM (0-90, JAGUAR 4000)
• Removable blade cover
• Gantry: 192" long rails, 10'-8" cutting area, gantry drive speed: 1-40 FPM, flanged steel wheels on both sides, automatic air brakes

• Electrical power at machine: 480 volt (-15/+10%), 3 phase, 60 Hz
• Air supply at machine: 3 SCFM volume, 100 PSI pressure, free of oil, water and grit larger than 25 micron (3/8" I.D. air line)
• Water supply at machine: 3-14 GPM at 50 PSI
(see blade supplier) (3/4" I.D. water line)

• Maximum sawing depth: 15" with 40" blade

• Blade housing built to accept 40" blade (maximum)
• Blade center hole to fit a 50 mm arbor shaft
• Blade mounted on left side of bridge as viewed by operator
• Blade flange size: 8"
• Maximum tool width: 1-1/2"

• Programmable for automatic operation
• Remote dial-up serviceability
• Automatic step cut with final pass
• Digital input of variable next cut locations with kerf adder
• 12" touch screen for all powered movements
• Main motor amp meter with over amp protection
• Amp following
• Water flow safety
• Water control solenoid
• Hour meter with clock
• Laser light
• Hand held pendant for directional control of cross head travel, raise and lower movement and gantry positioning (includes E-stop)
• English/Metric data input

• Straight-line profiling
• Programmable for automatic operation
• Remote dial-up serviceability
• Automatic step cut with final pass
• Digital input of variable next cut locations with kerf adder
• Color touch screen for all powered movements and data input
• Hard drive for profile storage
• Internet connection
• USB flash Drive
• CD ROM Drive
• Ability to input profile while machine is in operation
• Ability to accept DXF data input
• On-screen shape viewing
• Main motor amp meter with over amp
• Amp following
• Water flow safety
• Water control solenoid
• Hour meter with clock
• Laser ligh
• Hand held pendant for directional control of cross head travel, raise and lower movement and gantry positioning (includes E-stop)
• English or metric data input capability