Selected Specifications

ThinStone TXS-4500 Stone Veneer Fabrication System

• Weight 18,000 lbs.
• Process natural stone from split face or natural finish into thin veneer corners .
• 12" high cut depth .
• (2) 40HP arbor drive motors .
• (2) Diamond Blades, 40 inch diameter (customer supplies blades) .
• Belt driven opposed Timken bearing arbors .
• Quick detachable blade shroud covers and water forks .
• Blade positions adjustable horizontally and vertically .
• Water deflector shroud on discharge end of machine.
• The base machine features 3,200 rpm arbor drives capable of blade speeds, 10,935 SFPM to meet your stone’s specific cutting needs. A wide range of blade speeds are available. Contact your Park sales consultant for more details.

• Belts: (1) 12" wide x 15' long; (1) 12" wide x 17' long.
• Replaceable machined steel slider beds under the cut area .
• VFD conveyor drives, adjustable speed 0.1 to 15 FPM .

• Simple On/Off, Start/Stop/Pause controls .
• Soft start for arbor motor .
• Conveyor base speed adjustable .
• Amp following of the arbor motor to control the speed of the conveyor
• 480V/60HZ/3phase