Park Industries - Made in the USA! - Turntables

360-degree rotation, manual movement
Supported on four legs
Pneumatic brake
Central grease location
Two 45-degree and four 90-degree pneumatic stops
Accuracy of position using stops: 3/64" over 8'
Steel plate top, stress relieved and machined with drip edge
Requires air supply 3 CFM @ 90 psi
Customer supplies wood or cement grout to attain proper blocking height of stone
Not available with tilt option

Heavy-Duty Powered/Programmable Ball-bearing Turntable with 10-Ton Capacity

360-degree electronic rotation
Manual mode allows positioning with pendant or control station at 45-degree preset increments
Table can be manually jogged to infinite positions
Automatic mode for unattended table movement to 0 and 90-degree positions; can store 10 separate table setup parameters
Pneumatic brake
Eight pneumatic stops located every 45 degrees
Accuracy of position using stops: 1/32" over 8'
Steel plate top, stress relieved and machined with drip edge
Supported by four legs
Central grease location
Customer supplies wood or cement grout to attain proper blocking height of stone
Requires air supply at machine: 3 SCFM at 90 psi

Heavy-duty 6' x 10' Ball-bearing Turntable with 3-Ton Capacity

Heavy-duty 6' x 10' Ball-bearing Turntable with 3-Ton Capacity & 1,500# Hydraulic Tilt Capability

360-degree rotation, manual movement
Stop locations at 45, 90, 135, and 180 degrees
0 to 70-degree tilt
Hydraulic power unit
Manual hand brake, turntable locks at any angle
Central grease location
Customer supplies cement grout to attain proper blocking height of stone and electrical power access
Interlock safety to prevent rotation while tilted

Heavy-duty 6' x 10' Ball-bearing Turntable with 3-Ton Capacity & Pneumatic Stop Locations and Pneumatic Brake

Heavy-duty 6' x 10' Ball-bearing Turntable with 3-Ton Capacity, 1,500# Hydraulic Tilt Capability & Pneumatic Stop Locations and Pneumatic Brake

360-degree rotation, manual movement
Stop locations at 0, 45, 90, 180, 225, 270, and 315 degrees
Turntable locks at any angle
0 to 70-degree tilt
Hydraulic power unit
Pneumatic brake: 90 psi at 3 CFM; requires air supply at machine
Central grease location
Customer supplies cement grout to attain proper blocking height of stone and electrical power access
Interlock safety to prevent rotation while tilted