Options

• 575 Volt Power
• Reservoir heater
• Skid mounted

• Located 60" from the machine on the right side as viewed from the feed side
• 18 HP at 3,200 RPM
• 100 Gallon hydraulic fluid reservoir
• Aluminum/rubber pump to motor coupler
• Screen suction filter
• Reservoir site/temp gauge
• Return line oil filtration
• Hour Meter

• Overhead mounted, rotary style gauge
• 2-1/2" minimum, 24" maximum gauge distance range
• Gauge setting adjusted manually with hand crank located on one adjusting screw
• 1-1/4" Veneer Gauge cylinder braced to reduce the effects of impact from larger stones
• Gauge engaged by operator with hydraulic control lever, gauge disengages automatically as split is started
• Two gauging fingers mounted on solid 3-5/8" diameter shaft
• Actuated from operator area

• 30" wide x 120" long
• 6-5/8" OD rollers, 1-1/4" shaft with flange block bearing, 7-7/8" roller centers
• Hydraulic chain drive forward/reverse
• Conveyor weight: 3,000 lbs.

• 30" wide x 120" long
• 6-5/8" OD rollers, 1-1/4" shaft with flange block bearing, 7-7/8" roller centers
• Hydraulic chain drive forward/reverse
• Conveyor weight: 3,000 lbs.

• 24" wide x 120" long
• Conveyor weight: 2,500 lbs.
• 1-1/16" hex axles, 3-1/2" roller diameter, 5" spacing
• Slotted frame for easy roller removal

• 24" wide x 120" long
• Conveyor weight: 2,200 lbs.
• 2-1/2" roller diameter, 11/16" hex axles, 6" roller spacing with 3" spacing next to chisel line
• Chip guard for belt protection
• Shafts on top of frame