The Park Industries® TITAN® Digit-All™ CNC SlabCenter: 
ONE machine. ONE table. ONE operator.

St. Cloud, MN, April 2, 2009: Park Industries® has introduced the new TITAN® Digit-All™ SlabCenter, an all-in-one CNC stone fabrication machine for countertop production. The TITAN® Digit-All™ dimensions, shapes and edge finishes full slabs using just ONE machine, on ONE table, and with only ONE operator. The machine saves time and labor by eliminating material handling steps on separate machines. There’s no need to lift material from one set-up to another - ever. The Digit-All’s footprint also conserves shop space when compared to dual zone or shuttle table CNC systems. With just a few simple steps, fabricators can completely fabricate an entire slab at one station with finger-push part positioning.

Using the TITAN® Digit-All™ is fast and easy. To call up programs, the operator simply points and-clicks a bar code reader. An overhead laser projects, with precise accuracy, where the vacuum pods should be placed on the table. After pod placement, the operator starts the slab separation sawing cycle. An independently controlled CNC saw dimensions natural stone or quartz material slabs with extraordinary accuracy. After the parts have all been separated on the slab, the edge finishing program is called up again by bar code and the parts are floated into position while on their pods by reverse vacuum air flow system. One operator can effortlessly guide the common-line cut separated parts to their edge-finishing location using the guidance from the overhead laser. There is no need for a second work table or a material handling system! The parts are then ready for shaping and edge polishing.

For smaller shops, this revolutionary concept allows fabricators to produce kitchens with just one machine. For medium to larger shops, the TITAN® Digit-All™ CNC SlabCenter gives fabricators the flexibility to route their job flow processes based upon their production schedule. The TITAN Digit-All™ CNC SlabCenter also provides the peace-of-mind to schedule machine maintenance on other machines without impacting production schedule. The new Park TITAN® Digit-All™ CNC SlabCenter does it all – ONE machine. ONE table. ONE operator.

Call Park Industries at (800)328-2309 to find out more about the TITAN® DIGIT-ALL™ CNC StoneCenter.

EDITOR/REPORTER NOTES: Park Industries is the largest manufacturer of stone working equipment in North America with headquarters and two manufacturing facilities in St. Cloud, Minnesota