Upcoming Classes
Select the months below for course dates and information.
May
5/29 – SABERjet XP with DynaMAX 350 (previously Hypertherm Echion)
5/30 – TITAN 3000 Series
5/31 – SABERjet XP with DynaMAX 550P & 560P (previously Predictive 50 and 60)
July
7/1 – TITAN 3000 Series
7/2 – VOYAGER XP
September
9/11 – SABERjet XP with DynaMAX 550P & 560P (previously Predictive 50 and 60)
9/12– TITAN 3000 Series
9/13 – SABERjet XP with DynaMAX 350 (previously Hypertherm Echion)
November
11/7 – JAVELIN
11/8 – TITAN 4000 Series
Focused Machine Maintenance Training.
Park Industries® is hosting exclusive events for machine operators to learn advanced machine maintenance techniques to improve machine life and reduce downtime.
Clinic Details
Location: Park Industries® – St. Cloud, MN
Cost: $500 per student per class (to be billed)
Time: 8:00am-5:00pm (lunch provided)
Cancellation Policy: Registered attendees must notify Park Industries at least 14 days prior to the registered class date to avoid being billed the $500 course fee by emailing events@parkindustries.com.
What do you learn?
Browse the classes below to learn what will be covered at the clinic.
TITAN 3000 & 4000 Series
ELECTRONICS & CONTROLS: Component Identification & Basic Overview/Refresh
THK RAILS & BEARINGS: Grease, Maintenance, & Proper Care
SPINDLE: Set-Up, Care, Replacement, & Alignment
VACUUM PUMP: Daily Care & Maintenance
* Clinic is designed for TITAN 3000 & 4000 Series only.
SABERjet XP CNC Sawjet
THK RAILS & BEARINGS: Proper Care, What to Watch For & Identifying Future Issues
HIGH PRESSURE LINES: Lining Up Connection Seals & How to Properly Tighten Them
GEAR ENGAGEMENT: Engaging Gears into Gear Rack & Maximizing Pinion/Gear Rack Life
INTENSIFIER: Replacing HP Seals, Understanding Poppets, & Identifying Potential Problems
TABLE LEVELING: Maintaining a Level Table For Miter Cutting
GARNET FLOW: Operation of System & Troubleshooting
CALIBRATIONS: Blade to Jet Cut Transition
VOYAGER XP CNC Saw
THK RAILS & BEARINGS: Proper Care, What to watch for and Identifying future issues
GEAR ENGAGEMENT: Engaging gears into gear rack and Maximizing Pinion/gear rack life
TABLE MAINTENANCE: Maintaining a level table for miter cutting
MAINTAINING Y AXIS GEAR BOX: Deinstalling gear box, changing fluid, reinstalling gearbox, and referencing the Y Axis
CALIBRATIONS: Advanced dialing & Set machine offsets
TITAN Fab Center
ELECTRONICS & CONTROLS: Component Identification & Basic Overview/Refresh
THK RAILS & BEARINGS: Grease, Maintenance, & Proper Care
SPINDLE & BLADE ARBOR: Set-Up, Care, Replacement, & Alignment, Chiller Fluid Replacement
VACUUM PUMP: Daily Care & Maintenance
OVERHEAD LASER: 12 Point Calibration & Core Hole Test
ITM (if applicable to your machine): Calibration and Beam Alignment
*Clinic is designed for TITAN Fab Center Series only.
Questions about the Clinic?
Contact Us
800.328.2309 | park@parkindustries.com
24/7 Service: 800.785.3391
Sign up For Your Class
Select the machine(s) & date(s) you’d like. Space is limited to six people per class – you may register two people max from your company per class.
The Advanced Maintenance Clinic™ is an event held as part of Park Industries’ World-Class Commitment to Service Excellence.