If you lost the Quick Access Tool bar you an import it back in.
In Alphacam right click on the blue tool bar

Select Customize

Click on Customize Ribbon on left side and then Import/Export button on right side and select Import.

Guide Number: SG1105 | Printer Friendly Version | View Safety Disclaimer | Need Help?
If you lost the Quick Access Tool bar you an import it back in.



Last updated: November 21, 2023
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.