Standard Calibrations for Blades and Waterjet on the Javelin (3 Videos)

Guide Number: SG1832 | Printer Friendly Version | View Safety Disclaimer | Need Help?

Time to Complete: 28 min

Skill Level 2

Moderate task, requires some mechanical/electrical experience.

This guide shows the standard calibrations for an operator of a Javelin to produce accurate cutting with minimal transitions between the blade and waterjet - short of doing any Axis dialing which should be done first in the case of a crash. Links for Dialing an A or C axis on the Javelin will be referenced below at the end of this guide.

Part 1 - Calibrating a Blade on the Javelin

Part 2- Calibrating the Miter Offset on the Javelin

Part 3- Aligning the Nozzle to the Blade on the Javelin

Javelin Dialing- (3 Videos + Step by Step guide)

Javelin Dialing