This guide shows the standard calibrations for an operator of a Javelin to produce accurate cutting with minimal transitions between the blade and waterjet - short of doing any Axis dialing which should be done first in the case of a crash. Links for Dialing an A or C axis on the Javelin will be referenced below at the end of this guide.
Part 1 - Calibrating a Blade on the Javelin
Part 2- Calibrating the Miter Offset on the Javelin
Part 3- Aligning the Nozzle to the Blade on the Javelin
Javelin Dialing- (3 Videos + Step by Step guide)
Javelin Dialing