In this new video series we will be going through the steps to calibrate Slabsmith on the Pathfinder. This process will be split into multiple steps to make it easier and include an advanced video for better calibration and photos.
Scan to View on Mobile Device
Calibration Video
This video will be the basic calibration of Slabsmith. For most situations, this will cover what you need to do to re-calibrate.
Setting The Origin Point
This video will demonstrate how to set the origin point or zero point in Slabsmith. This can also be referred to as the 2-stop method.
How to Adjust the Blade To The Stops on CNC Saws and Sawjets
You would use this video to make sure your zero point on your saw table is in the correct position. This will work for Saber, Voyagers, Saberjet, Saberjet XP, Saberjet XP 2 Table, and Javelin machines.
How to Adjust Camera Lighting and Verification Targets
For most people this is not required.
In this video, we will show you how to adjust the settings for the verification targets and changing options to get a better picture within Slabsmith. It is recommended to take a screen shot or photo of your settings prior to adjusting anything so you can always get it back to where it was.