How to Replace the Y Axis Drive Gear - Video

Guide Number: SG1837 | Printer Friendly Version | View Safety Disclaimer | Need Help?

Time to Complete: 1 hours

Time to Complete: 30 min

Skill Level 2

Moderate task, requires some mechanical/electrical experience.

In this video we will show you the process of replacing the Y axis drive gears. This process is used on Saber, Voyager XP, Saberjet, Saberjet XP and Saberjet XP 2 Table Machines.

Scan to Watch on Device:

Additional Resources

Once you completed the process of replacing the drive gears, you will want to also set the Y axis backlash.