This guide is a two part video series that will explain both the operations and programming for Leathering/ Honing slabs on the Park Industries Voyager XP. Much of this information will be transferrable to the Park Industries Saber CNC saw as well as the Park Industries Titan CNC router - however this guide is specific to what a operator and programmer will want to pay close attention to on the Voyager XP.
Part 1 - Setting up the Voyager for Leathering
Chapters: Introduction Tooling Types and Information Tool Change Location Tool Touch Off Moving into Safe Location Run the Program
Part 2 - Programming the Voyager for Leathering
Chapters: Introduction Create Tool Make Part and Material Geometry Apply Cutting information Modify the Lead In Run in Simulation and Send Code