Quick Reference to Titan 4K Service Guides

This is a quick reference guide that will help you find service guides for the Titan 4K.

Scan to view on mobile device

Quick-Reference-to-Titan-4K-Service-Guides

Machine Manual

The operation and maintenance manual for the Titan 4K series CNC from Park Industries®.


Machine Software

Test-Stop-Alarm

In this guide we will go over the test stop function. The test stop is required when powering up the machine & after the machine has been on for 24 hours. 


Vacuum

Vacuum-Pump

In this video, we will discuss how to troubleshoot the vacuum system on your CNC Router

Vacuum-Manifold

In this video we discuss how to diagnose a 700033 Vacuum Pump Supply Water Flow Too Low alarm.


Spindle

Gripper

These videos show how to install and remove the new Quickset gripper set assembly.

dial-water-union

In this video we will show you how to change out the water union.


Lubrication Flow

Titan Greaser

This video will go through how to diagnose grease flow issues on the Titan if you have a 700041 Lubrication Flow is Low Warning.

This video is done on a Voyager but is the same concept as the Titan 4K.