saberjet xp - hypertherm communication

Guide Number: SG0798 | Printer Friendly Version | View Safety Disclaimer | Need Help?

Time to Complete: 2 min

Skill Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

Setup the IP Address for Hypertherm communication to the Saberjet XP

Scan to Read on Device:

If the ip address is not set correctly, you will get an alarm



1058 Hypertherm-No Communication



On the Hypertherm touch screen select the settings tab.

Click on the Hypertherm Icon

Click on Remote Settings

The IP Address should be set to 192.168.137.77