Setting Arbor to Nozzle Offsets on the SaberJet

Guide Number: SG1992 | Printer Friendly Version | View Safety Disclaimer | Need Help?

Time to Complete: 1 hours

Skill Level 2

Moderate task, requires some mechanical/electrical experience.

This video shows how to align the Water Jet cuts to the Blade cuts. It is a continuation of the Dialing A&C on the SaberJet video.

Scan to view on Mobile Device

 

 

 

 

 

 

 

 

 

 

 

 

Chapters:

0:00 Introduction

0:34 Nozzle to Blade (in the X)

3:45 Nozzle to the A axis (in the Y)

7:08 C to the Arbor (in the X)

9:55 Arbor to A (in the Z)

11:52 Arbor Flange to A (in the Y)

13:35 A to C (in the Y)