The spindle guard can prevent damage to the Spindle nose cone bearing in the event of a crash. It protects the Spindle nose cone bearing.
Scan to Read on Device:
Installing Guard
The spindle guard is a sleeve which, when installed, prevents damage to the spindle nose cone bearing in the event of a crash. Park industries recommends that you install the device immediately Warranty will be denied if indications of a crash or physical damage are evident. If you have any questrions please call Customer Service at 1-800-786-3391.
The installation process should take a few minutes. Install with the guard's slots in the up position. Ensure the sleeve is against the spindle collar before tightening the hose clamp.
