Spindle reset-video

Guide Number: SG0759 | Printer Friendly Version | View Safety Disclaimer | Need Help?

Time to Complete: 3 hours

Skill Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

This guide will walk you through what you will need to do to reset your spindle and make sure it is in good operating condition.

Scan to Watch on Device:

Spindle Sweep

Spindle to Table Z Height

Spindle to laser offset

Check tool pocket locations

Spindle Orientation

Check tool pocket Z Height

Overhead Laser Calibration and Core Hole Test

Use this video for Titan 1K and 2K models

Use this video for 3K and 4K models.