Squaring the Bridge - Video

Guide Number: SG1850 | Printer Friendly Version | View Safety Disclaimer | Need Help?

Time to Complete: 45 min

Skill Level 2

Moderate task, requires some mechanical/electrical experience.

In this video we will show you how to square the bridge for Saber, Voyager XP, and Saberjet Series Machines. Bridge can become skewed if crashed hard enough or in the event of changing out a pinion gear, bearing, rails or gear rack.

Scan to watch on device

Additional Items:

Once you have completed the process of squaring the bridge and referencing Y axis, you should complete the following:

✔️ SET WORK TABLE OFFSETS

✔️ CHECK BACKLASH

✔️ BLADE OFFSET CUT

✔️ TCP CALIBRATION (SABERJETS ONLY)