An error has been found in the TITAN ITM Calibration Tool Setup procedure. Please ensure that step A (shown below) reads 0.1 and not 1.0 in your TITAN Operation and Maintenance manual.
Scan to Read on Device:
This screen is located in the following Operation and Maintenance manuals:
TITAN 1700 - page 4-111 or page 4-113
TITAN 1600/1800 manual - page 3-127 or page 3-129
TITAN FabCenter manual - page 4-107 or page 4-123, or page 4-141 or page 4-143
If you have any questions, call Customer Support at 1-800-785-3391.