In this video, you will learn how to use Blend to edit geometry. This will help when programming any of our CNC Routers, Sawjets and Saws including the Park Industries Titan, Voyager, Fusion, Saber, Focus, SABERjet XP, and SABERjet XP two table machines.
Using the Blend Command (video)
Guide Number: SG1584 | Printer Friendly Version | View Safety Disclaimer | Need Help?
Last updated: July 17, 2024
ATTENTION
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.