TracKlean™
Self-Cleaning Table
Tired of fishing out fallen parts from underneath the table? Cleaning the table a pain? The TracKlean self-cleaning cutting table makes life easier. Retrieve a fallen part in under 10 seconds or clean the table in under 60 seconds with the push of a button. Available exclusively on the KANO HD.
-
FAST PART
RETRIEVAL -
CLEANS + PLOWS
SLAG UNDER TABLE -
SYNCHED TO
GANTRY MOTION
What Exactly is TracKlean™?
The TracKlean™ cutting table design is comprised of two unique traveling cars. Each car includes a slag bin and a detachable plow. Movement of the servo driven cars is synchronized with the gantry motion.
Included with TracKlean is Park’s exclusive Air Sweep™ design, maximizing the effectiveness of any exhaust collector via twin roller and belt systems that maintain suction through dual side exhaust tubes.
Table Size Offerings
Any combination of the following:
Cutting Widths:
- 6 ft
- 8 ft
- 10 ft
Cutting Lengths:
- 12 ft
- 24 ft
SIMPLE OPERATION + CONTROLS
Easily and quickly perform multiple functions of the TracKlean table with the press of a button on the user-friendly touchscreen.
TRACK
Press TRACK on the TracKlean touchscreen and the car relocates itself under the cutting torch and is synced to the gantry motion.
RETRIEVE
If a critical part falls through the slats and into a removable slag bin, press the STOP button to pause cutting and then press RETRIEVE. The car and slag bin will move to the front of the cutting table in under 10 seconds (even with a 24 ft. long machine.) The needed part can be quickly and safely retrieved. With the car at the front of the machine, slag bins may also be lifted out and dumped when required. Quickly return to cutting by pressing the System Enable button and then TRACK to relocate the car under the torch.
PARK + CLEAN
When cleaning the floor of the cutting table is required, press PARK and the cars move to the rear of the table so the plows may be engaged to the cars by dropping four pins. Then, press CLEAN and the plows push the slag to the front of the table in under 60 seconds with a 24 ft. long machine.
See the power of TracKlean in 60 seconds!
In-depth demo of the TracKlean Self-Cleaning Table. (5:20)
ADVANTAGES & DISADVANTAGES OF TRACKLEAN TABLE
| ADVANTAGES | DISADVANTAGES |
| Dry cutting will produce the best cut quality and fastest speeds when cutting steel | Higher purchase cost |
| Maximizes cutting productivity by minimizing down time for table cleaning | Longer overall machine foot print |
| Ability to pause cutting to retrieve critical parts that have fallen into the table | Higher cost if heated air is exhausted from the shop to the outdoors |
| Plate and machine do not get wet and rust | Higher cost if a smoke collector with filters is required to clean the exhaust fumes |
| Low cost if exhausting fumes directly outside is permitted |
