Park Industries® began providing full-service solutions to the stone industry in 1953. Today, we’ve grown to become North America’s largest manufacturer of stoneworking equipment.
From the culture, to the state-of-the-art facility, to the exciting innovation of building something great, Park Industries® stands out as an employer of choice in Minnesota.
Park Industries® has invested in an infrastructure focused on providing world-class customer services and support. 22% of associates are dedicated to customer support roles.
Moderate task, requires some mechanical/electrical experience.
Time to Complete: 28 min
This guide shows the standard calibrations for an operator of a Javelin to produce accurate cutting with minimal transitions between the blade and waterjet – short of doing any Axis dialing which should be done first in the case of a crash. Links for Dialing an A or C axis on the Javelin will be referenced below at the end of this guide.
Part 1 – Calibrating a Blade on the Javelin
Part 2- Calibrating the Miter Offset on the Javelin
Part 3- Aligning the Nozzle to the Blade on the Javelin
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
