SABER™ CNC Saw

5-Axis CNC Saw for Fierce Profitability

SaberMain.png

Sink your Teeth into a 5-Axis CNC Saw

The SABER™ provides 5-axis CNC sawing performance you’ve dreamed of. Built with ease of programming and operation in mind, the SABER is packed with features you won’t find on other CNC saws. The SABER’s monoblock design with orthogonal cutting capabilities is an ideal cutting workstation. The SABER elevates the value of a CNC saw by cutting radius curves and servo mitering, plus it automatically cuts a variety of predefined shapes that can be dimensionally scaled. The SABER is the solution to begin your shop’s transition into CNC sawing.

SABER-5-Axis-CNC-Saw-for-Stone-Profiling.jpg

STRAIGHT LINE PROFILING

SABER-5-Axis-CNC-Dimensional-Saw-for-Curved-Contour-Stone-Cutting.jpg

CURVED CUTTING

SABER-5-Axis-CNC-Saw-for-Mitering-and-Chamfering-Cuts.jpg

SERVO MITER CAPABILITIES

Precision from All Angles

The SABER™ CNC Saw utilizes a 5-axis controller that operates the X,Y, and Z linear axis as well as having the capability to rotate on the A and C axes:

Straight Line Profiling
Consistently create finished linear profiled stone in less time with accuracy. The SABER is the ultimate machine for creating amazing detail for straight profiled natural stone.

Cut Curves with Contour Cutting
Bumpouts? Radial cuts? No problem. The SABER 5-Axis Dimensional CNC Saw cuts curves with its contour cutting motion.

Gauging
When consistent stone thickness is a concern, the SABER is capable of gauging the stone to the depth you prefer, up to 4 inches thick. The operator can set the SABER to a precise thickness either manually or with a simple program.

Step Cutting & Plunge Cutting
The SABER is capable of plunge cutting and step cutting. Even the hardest of materials is no problem. The SABER can tackle any project with ease. The depth of each step cut will depend on the material. The maximum depth of cut is 4 inches.

Pool & Patio Coping
The coping capabilities of the SABER allows the operator to complete pool edging, or patio edging projects with ease. The simplicity of the programming provides the flexibility of creating miscellaneous shapes and sizes. The SABER is capable of cutting stone pieces that are rectangle, square, or unique shapes to form various structured projects.

Match these capabilities with the Servo Motor Mitering's automatic 0-47 degree blade rotation for chamfering and laser alignment to make any cut up to 4" max depth with ease. The SABER also has a VFD (Variable Frequency Drive) that changes the RPM required to cut to allow for optimal cutting speeds. 

Increase Ease and Productivity

Complete with our unique hydraulic tilt table, the SABER CNC Saw allows operators to have a safe and faster way to load or unload slabs. Bolt Action Pins are utilized for an easy, efficient, and durable way to hold a slab in position while loading the table. This time saving feature equals higher productivity. The open architecture design of the machine allows the operator to have a full view of the work area. 

Structural features of the machine allow for ease of installation and maintenance. It's monoblock structure means pick and place installation. The stress relieved steel bridge houses the rail for the carriage.  Profiled Rails increase accuracy because the bridge is actuated by a gantry rack and pinion assembly that is servo driven for rapid positioning. 

Programming System with Flexibility

Operators can run the SABER CNC Saw automatically or manually. It includes automated cutting of a variety of predefined parametric shapes that can be dimensionally scaled. The HMI control panel can be conveniently positioned.

Two big features are included; the first is manual joystick controls which are convenient for operating the machine whether it is in automatic or manual. The second is a wireless pendant that is extremely convenient for set-up, that allows operators to control the machine from different locations with literally no strings attached. Consistently create finished linear profiled stone in less time with more accurate cuts.

Finally, it utilizes Park’s user-friendly iTEC Interface technology as an operator’s best friend - This intuitive system utilizes a touchscreen controller.

Features & Benefits

Sink your Teeth into a 5-Axis CNC Saw, with the SABER: 

  • 4" Max Cut Depth
  • Curved Cutting Capabilities
  • 0-47 degree Miter Cutting
  • Plunge and Step Cutting
  • Dimensionally Scalable Parametric Shapes
  • Monoblock Structure for easy pick and place installation
  • Coping Capabilities
  • Built-In Digital Imaging
  • Automated Tool & Blade Measurement (Optional)
  • Orthogonal Cutting Capabilities
  • VFD Variable Frequency Drive (RPM)
  • Owner Protection Services™ automatically notifies you of routine machine maintenance

 

Cut from any angle with ease with a SABER™ 5-Axis CNC Saw from Park Industries®. Contact Us or Find Your Sales Rep.

SABER 5-Axis CNC Saw.jpg

Request Pricing & Info

*
*
*
*
*
*
SABER 5-Axis CNC Saw for Stone Countertop Fabrication
+ 1

CUT UP TO 4" DEPTH WITH MITERING

The SABER offers cutting up to 4" depth and a unique miter capability is servo driven and will automatically position 0–47 degrees.

+ 1

HYDRAULIC TILT TABLE

The hydraulic tilt table on the SABER provides precision control and easy slab loading which reduces stone breakage. The hydraulics reliable, single cylinder lift system has a load capacity of 2,000 lbs. The design of the table structure allows for easy access to clean under the table.

+ 1

BOLT ACTION STOPS

The unique bolt action stops located on the SABER hydraulic tilt table are ideal for loading the slabs easily and safely. The bolt action stops are quick and simple to lock in or out of position for rapid material exchanges.

+ 1

UNITIZED BODY

The unique monoblock design allows the SABER to be installed and relocated easily, with no special foundation requirements. In addition, the structural integrity of the SABER results in incredible tolerances and accuracy.

+ 1

BELLOW COVERED WAYS

The bellow covered way protects the SABER from the harsh elements of countertop fabrication. The bellows are easily accessible and provide protection for ultimate uptime and longevity of the machine.

+ 1

LOW PROFILE / SMALL FOOTPRINT

The small footprint and compact design, of the SABER is ideal for countertop fabrication. Operators can easily access the table and maintain the machine. The minimal floor space and ceiling height requirements result in easier placement and mobility for installation.

+ 1

INCREMENTAL ROUTING

Drop out sink holes with the SABER incremental routing feature.

+ 1

CORING CAPABILITIES

The SABER CNC Saw includes a convenient tool mount for the spindle to core faucet holes. Save material handling time by coring quick, precise, quality holes every time with your CNC Saw. The Added flexibility of varieng core sizing, increases the value of the SABER and your profits.

+ 1

PROGRAMMING SYSTEM WITH FLEXIBILITY

Easily program with the flexibility and simplicity of the parametric programming feature of the SABER. Enter your dimensions and the saw automatically programs the shape to those dimensions .

The SABER CNC Saw controls also include:
- iTEC Touchscreen Interface
- Wireless pendant for convenient set-up

+ 1

Digital Imaging System

The SABER has a camera above the table allowing fabricators to photograph the slab and layout the program, right at the machine. In addition, the camera identifies the borders and fissures, resulting in increased efficiency and yield.

+ 1

OPS (OWNER PROTECTION SERVICES)

OPS Productivity:
- Capture Real-Time Mesurements
- Easy and Customizable Goal Setting
- Advanced Metric Programming and Reporting

OPS Maintenance:
- Automatic Notifications
- Electronic PM Manual
- Maintenance Logs

+ 1

alphacam

Alphacam is an intelligent and intuitive CAD/CAM software that provides customers with productivity, reliability and flexibility. Alphacam has been specifically developed to address the unique challenges of machining stone. Alphacam is the leader and software of choice for stone fabricators around the world.

SABER 5-Axis CNC Saw | Cutting Architectural Applications

SABER 5-Axis CNC Saw | FIERCE Productivity

Click to enlarge photos and browse machine photos.

“After I had a prominent employee quit, I thought I would be in trouble. The SABER CNC Saw cuts the slab, sink, and all radius corners with only 20 minutes of programming in the morning! I didn’t think saws like the SABER existed. It puts the hardest part of fabrication in my hands and makes it easy. It reduces the stress of dealing with labor issues. With the SABER, and only two polishers, I’m doing 12 kitchens per week and I am cutting three days ahead.”

Constantin Moga
Mogastone

“The SABER’s cutting accuracy and speed has really increased our production! It’s mitering speed has been very fast, and instead of it being a time consuming process, mitering has become a no big deal task with the SABER.”

David Swernoff
Lakeside Stoneworks

"We are saving app. $2000 per month on plastic template material along with 6 labor hours per day since having the SABER CNC Saw installed."

Wayne Fajkus
Granite By Design

“This easily trainable machine cut down on almost all of our overtime, while increasing production. Where we used to have overtime every other weekend, now its once every 3 months. The SABER CNC Saw is so easy to use. Once you tell it to cut, you are free to work on another job. There is time to prepare another job or inspect a slab. It is a nice flow and it helps projects get done quicker in a day. Once you hit ‘Go’, you can walk away.”

Carmine Pantano
Frank's Marble & Granite

"Best CNC Machine Today."

Josh M. 
Vaughn's Custom Countertops

North America's Leading Partner

for Dependable, High-Precision
Manufacturing Solutions