POWER UP WITH XP
Introducing the NEW SABERjet™ XP CNC SawJet from Park Industries. The XP powers up with industry-leading 27 hp saw arbor to make cutting even the hardest materials a snap. This, paired with the new Hypertherm® predictive maintenance 50 hp or 60 hp waterjet systems, provides unmatched processing speeds and shop efficiencies.
27 HP ARBOR MOTOR
DESIGNED FOR ULTRA COMPACT CUTTING
PREDICTIVE WATERJET PUMP
90 Day No Pay PromotionPark Industries® is offering a limited time promotion on all SABERjet XP and OPTIMUS models: No down payment OR any payments for 90 days.
HIGHER POWER. EASIER OPERATION.
Built off of the success and compact design of the SABERjet™, the XP model takes a leap forward in productivity with the 27 hp arbor motor and 50 hp or 60 hp precision waterjet systems.
The XP introduction also comes standard with automated programming routines specifically designed to cut ultra-compact, quartzite, and porcelain materials with increased speed, precision, and reliability.
27 HP Arbor Motor
The SABERjet™ XP 27 hp arbor motor allows fabricators the flexibility to cut a variety of surfaces including Ultracompact, quartzite, and porcelain materials.
Automatic Ultracompact Programming Routines
With a focus on programming simplicity, the SABERjet™ XP comes standard with automated programming specifically designed to cut ultra-compact, quartzite, and porcelain materials with increased speed, precision, and reliability.
Watch the SABERjet XP cutting Taj Mahal Quartzite.
Advanced, Energy-Efficient Waterjet
The SABERjet™ XP CNC SawJet utilizes a Hypertherm® HyPrecision 60,000 PSI Waterjet, one of the lowest cost of ownership waterjet systems in the stone industry. It allows for tighter part nesting and radius cuts, providing greater slab yield. It is American manufactured by Hypertherm whose partnership with Park Industries results in one of the industry's strongest teams in supporting fabricators' uptime.
HyPrecision Predictive Pumps
With the choice of the 50 hp or 60 hp, both include a built in standard motor soft start that requires less InRush electrical current, dramatically reducing your electrical bill. Less energy consumption is required during waterjet cutting while Hypertherm's booster pump maintains consistent water supply line pressure to the waterjet pump. Learn More about the revolutionary predictive waterjet pumps >
- Increased Productivity and Reduced Maintenance Costs
- Increased Performance
- Improved Reliability and Ease of Service
- Improved Safety
- Advanced Intensifier Technology (AIT) Reduces Maintenance and Boosts Performance
The MITER Advantage
With one of the largest mitering work envelopes in the stone industry - up to 7'x12' slab coverage - the XP can reach any miter with its precision mitering blade, or use its MiterJet (waterjet miters) option to produce flawless miter cuts allowing for tightly nested, clean, accurate parts.
XP includes simultaneous 5-axis waterjet cutting, including mitered arcs.
The small footprint, single-pick, monoblock design of the SABERjet™ XP CNC SawJet is ideal. It is a true monoblock design with no bolt-on extensions resulting in extreme rigidity. The compact sawjet machine design requires minimal floor space and offers a low ceiling height requirement - only 11 feet due to the no whip waterjet design.
This sawjet design includes high rails and bellow covered ways that protect the SABERjet™ XP CNC SawJet from the harsh elements of stone fabrication and maximize machine uptime/longetivity.
Multiple SawJet Tank Options
Choose the tank that is right for your stone fabrication process as the SABERjet™ XP CNC SawJet has three available tank options. All models are designed for easy tank cleaning with single pick slat frame removal.
Patented Slab Loader
The 1500 lb capacity, patented Slab Loader has a hydraulic powered tilt table allowing for safe, efficient loading of slabs, including fragile exotic stones or materials.
The Ballast Tank offers submerged jet cutting which significantly reduces the noise of the waterjet when stone cutting.
The standard tank is the simplest to operate and comes standard with the SABERjet CNC SawJet.
Flexible, Operator-Friendly Stone Cutting
Advanced CNC SawJet capabilities meet operator-friendly controls to provide stone cutting flexibility. The SABERjet™ XP's optional VFD (Variable Frequency Drive) increases the saw's efficiency when cutting ultra-compact surfaces and materials. This VFD option operates at a range of 1200-2500 RPM.
The SABERjet™ XP's laser line positioning is a visual guide that allows operators to position the cut path with confidence in its orthogonal cutting mode. Orthogonal cutting mode allows the machine's blade to cut manually in any direction at any desired angle. The complexity of this cutting style is made easy by allowing simple manual cuts without generating a program.
Positioning of the machine can be controlled by using manual joysticks on the HMI or a remote pendant, which allows operators to move freely around the sawjet with literally no strings attached.
Features & Benefits
POWERED UP Features | What's New with XP:
- Saw Arbor 27 hp to Cut Ultra-Compact, Quartzite, and Porcelain Materials
- Automated Ultra-Compact Programming Routines for Simplicity
- Auto Grease System for Ease and Machine Uptime (Optional)
- NEW Hypertherm® 50 hp or 60 hp Predictive Maintenance Pumps
Key Features | What's made the SABERjet the leading sawjet:
- Blade and Waterjet Miter Capability including Waterjet Miter Arcs
- Up to 7'x12' Slab Coverage
- Blade Mitering Capabilities
- MiterJet (Mitering Waterjet) Capabilities for Inside Corners
- Three Tank Options: Patented Slab Loader, Ballast, or Standard
- Dimensionally Scalable Parametric Shapes
- Minimal Height Requirements - 11 Ft.
- Monoblock Structure for Easy Pick & Place Installation
- Built-In Digital Imaging
- Orthogonal Cutting Capabilities
- Laser Guided Positioning
- VFD Variable Frequency Drive (RPM)
- Owner Protection Services™
- Centralized Grease Bank
The standard SABERjet CNC model is also available ... Learn More >