The PRO-EDGE® IV shapes and polishes a variety of convex edges. In addition, concave and ogee edges can be shaped and polished. The advanced control panel guides the operator through automatic steps and up to 70 programmable, repeatable edge profiles. Produce in 1 hour what it takes 5 hours to do by hand with the PRO-EDGE® IV Edge Polisher.
Up To 70
Shapes & Edges
Select the feature you'd like to learn about or slide through them below.
Edge Types: Convex, Flat, Ogee, Concave, Bullnose
Shaping & Polishing length: 1’ to 12'
Profile shaping & polishing thickness: 3/8” to 6”
Radius capacity: 0” – 3” radius
Pneumatic, pop-up, all way rollers on full table. Assists in positioning, loading, and unloading stone - 2500lbs. total lifting capacity.
Full color, high resolution touch screen displays complete information to control machine and setup edge profiles. Program Library stores up to 70 programmable, repeatable edge profiles allow different machine setups to be made quickly and easily.
SPINDLE: 2/2.5 HP @ 1710/3420 RPM (dual speed), Pneumatic head travel with position lock, Center water feed, and more.
SPINDLE MITER: Utilizes hardened alloy steel C-arm for 0 to 180 degree miter range.
The PRO-EDGE® IV Polisher is a fine-tuned combination of electronics and hydraulics that shapes and polishes a variety of convex edges from 3/8″ to 6″ thick and flat edges from 3/8″ to 4″ thick and up to 12′ long, as well as concave and ogee edges.
The user-friendly color touchscreen controls are intuitive and easy to operate. Managing material on the PRO-EDGE® IV Polisher is easy with the unique rubber surface. Stone surfaces are securely held polished side down with pneumatic hold-downs for exceptional polish quality. When the machine is finished, popup rollers make moving the material easy for a single operator, saving time and labor.
|Select up to 3 models to compare key specs||
PRO-EDGE® IVView Layout Drawing
|Number of Passes||Multiple Passes|
|Edge Types||70 Repeatable Edge Profiles (Flat, Radius, Decorative)|
|Number of Spindles||1|
|Material Handling||Pneumatic Clamps + Pop-Up Rollers|
|Part Thickness||1 cm - 6 in|
|Part Length||12" - 144"|
|Part Width||12" - 144"|
|Radius Capacity||Up to 3"|
|Footprint including clearance (L x W x H)||23'4" x 13'4" x 8'|