Saberjet Blade to Nozzle Alignment Guide

Product: SaberJet, SaberJet XP, SaberJet XP 2 Table, Stone

Guide Number: SG1464 | Printer Friendly Version | View Safety Disclaimer

Skill Level

Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

Time to Complete: 59 min

The purpose of this guide is to walk you through the steps to align your blade to nozzle properly.

The first step is to complete your blade offset cut.

Next complete the TCP Verification Square

If you are still experiencing issues, please call our technical support department.

Last updated: April 13, 2022

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com

ATTENTION

Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.

You are solely liable for the proper operation and maintenance of the equipment.

Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.

Safety is our number one concern, should you have any questions don’t hesitate to call our service team at 800-785-3391.