The Most Profitable Way to Flat Polish
Use our FASTBACK® II Labor Savings Calculator to see why you don’t need to increase your headcount to increase your profitability and productivity.
Try the FASTBACK® II Labor Savings Calculator
Hand Polisher vs. FASTBACK® II
You’re busy growing your business. You’re not an HR recruiter. Ready to increase productivity without adding people to your crew? Click the box below to get started.
Labor Savings Potential
Replace 2+ Hand Polisher Positions
Product Speed Potential
Polish Up to 325 lineal ft / hr
Hand Polisher Positions Filled
No Recruiting Costs or Headache
- Single Pass, Load-and-Go Automation
- 45 Degree Chamfer Top and Bottom Edge Corners (removes saw chips)
- Polish Offset Pro for Euro Seams
- 9 Spindles with Spindle Stagger
- Tool Life Monitoring
Let’s Talk Flat-Edge Polishing
Fill out the form below to speak with a Park Industries® sales consultant about the FASTBACK® II.
The labor savings with the FASTBACK® II is huge. The FASTBACK® II running for 1-2 hours will complete what it takes two qualified polishers to complete in a full day. If I took the FASTBACK® II out of the shop, the guys would kill me.
Carolina Custom Surfaces
The edges come off flawlessly polished on the FASTBACK® II. On our old edge machine, we had to work hard with a lot of finessing to get high quality edges. With the FASTBACK® II we just ‘set it & forget it’… well we can’t forget it, because it’s coming out so fast!
Rino's Tile & Stone
This thing just prints money. The FASTBACK® II runs material through at 65-70 inches per minute to a perfect polish. You cannot get anywhere near that hand polishing. I’ve never seen a better polish in my life.
No shop can afford NOT to have a FASTBACK® II. It has one task (backsplash) and it does it stellar.
McKenzie Stone & Tile
Park Industries® installed a FASTBACK® II Edge Polisher in my shop 3 months ago…This machine is absolutely amazing and a game changer!! I always believed you could not get a better polish from a machine, but I would put this machine up against any hand polisher hands down. It has worked flawlessly and improved our productivity way beyond our original expectations!!!
The FASTBACK II has had a huge return on investment for us. Single best tool we have purchased. Can’t go wrong with this machine.”
Rock Solid Surfaces
Oh man, the FASTBACK® II is the best to polish with. I can polish a full kitchen in under 20 minutes, we are so pleased with that machine.
San Marcos Marble & Tile
Where do I start with? The backsplash comes out perfect. The polish is glass. We can run vanities and islands through it too. The speed alone…we went from one guy doing backsplash all day to running this machine for 30 minutes a day. It’s not even a question, it pays for itself so fast…every shop needs a FASTBACK® II.
Derick & Winnie Hunt
Cabinet & Granite Depot
The FASTBACK® II is one of the most important pieces of equipment any shop should have. It’s going to pay for itself. What it does in one day, it would take a fabricator a full week. And the longevity of the tool life is insane. Just what your saving in pads, it’s worth buying the machine.
East Coast Countertops
Polishing manually prior to the FASTBACK® II, we averaged about 2” / min by hand. Now, we run everything through that FASTBACK® II at 60” / min or more. The polish is perfect every time. It saves us a ton of time and time is money.
Quality Floor Covering & Stone
The FASTBACK II does the work of 3-4 polishers. I can’t feed the FASTBACK® II fast enough, and the finish comes off like glass – a perfect polish….even on full islands. I wish I got this machine years ago – it’ll pay for itself in a year or so.
When I think about the amount of time I’ve wasted hand-polishing splash… (laughs) After seeing what the FASTBACK® II can do, I can’t imagine not having it. It’s easily paid for itself.
If you do at least 2 kitchens a day, the FASTBACK® II is the machine you can feel good to buy without any hesitation. It just prints money…It’s an absolute no brainer.
Evolution Marble and Granite
You would have to pry the FASTBACK® II out of my dead fingers…I couldn’t go without it. We’ve run out of stuff to put through it. It’s so well built, I love it.
Take it for Granite LLC
They are FAST! It takes a job that would take a skilled guy 15 minutes and does it in 3 minutes. They just keep crushing it through. FASTBACK® II [Edge Polishers] are worth every penny!
I couldn’t live without the FASTBACK® II. No one can tell me I could live without it. Period, end of a story. No one should have a doubt about this machine. Call me or come visit if you do have a doubt.
AA Granite Fabrication Center
The SABERjet™ and the FASTBACK® II…I love those two machines. They save me so much money….so much money.
AA Granite Fabrication Center
Both the TITAN® Fab Center and FASTBACK® II have far exceeded expectations. I wish I had bought both of them 5 years ago.
A great addition to any shop…I would recommend even just starting out with a FASTBACK® II if you can’t afford a TITAN®. It increases your capacity and saves tons of labor hours.
Robert Wiemann & Giuseppe Vanderputten
The FASTBACK® is a very easy machine to run. We push 30 inches of material through this machine every minute. It is a highly productive machine that has increased our productivity 10 fold.
Hatton Granite Countertops
Put stone in the front and catch money on the end. Every shop needs a FASTBACK ® II.
Victor Swithenbank III
The FASTBACK® II is unbelievable. Saves us tons of time. Should have bought it 15 years ago….The guys LOVE it!
Cache Valley Cabinets & Tops
I really like the consistent polish the FASTBACK® provides us.
Lance Van Norman
The FASTBACK® has provided us tremendous quality and consistency.
Everything with this machine continues to go well. The only thing I would change about my experience with the FASTBACK® is buying one sooner!
Custom Stone Interiors
The FASTBACK® has replaced two labor positions in my shop, and the machine will certainly pay for itself in 18 months.
Easy Care Countertops
The FASTBACK® is handling our flat edge production at twice the speed of our previous edger, saving us 7 labor hours per day.
We had the Sasso Flying Flat which worked well for us over the past 6 years however, the quality and flexibility of the FASTBACK® is far superior. We are now running production tops through the FASTBACK® which eliminates even more hand polishing and TITAN® machine time. My operators are fighting over who gets to run the FASTBACK® and have started running splashes directly off the FUSION® vs. stacking them to the side and hoping someone else would run them.
Majestic Marble & Granite
Subscribe Here for the latest news from Park Industries®