BASIC Voyager XP PROGRAMMING

Guide Number: SG1553 | Printer Friendly Version | View Safety Disclaimer

Skill Level

Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

These videos give instruction on basic alphacam programming for the Park Voyager XP.

Programming Voyager Part 1

This is a Video Tutorial on How to Make a Program using the Saw Blade for a Park Industries Voyager CNC Saw. In this Basic Introduction Tutorial you can learn how to make good simple programs for the Voyager CNC Saw.

Chapters:

0:00 Introduction

0:15 Create Parts

1:55 Move Parts on Material

5:00 1st Program 2 Parts

8:51 Add 2 more parts

11:00 Program 4 Parts

11:36 Tight Cut Explained

12:43 Adjusting Part Spacing

17:00 Making an Efficient Layout

22:00 Outro

Programming Voyager Part 2

Other Tools and Shapes, is to cover more basic programming and layouts with parts other than rectangles. It also covers how to apply Incremental Routing to complete cuts.

Tags: CNC machines Toolpath Programming Tight Cut TightCut Spacing Layout Parts Voyager Saw CNC Layout Basic incremental routering plunge overtravel

Chapters:

0:00 Introduction

0:32 Prepared Drawing

3:13 Move Parts on Material

10:25 Program Parts

13:10 Extend Cuts

13:30 Incremental Router

15:28 Order Cuts

16:23 Send Gcode

16:42 Quick Program

20:55 Outro

Last updated: March 31, 2023

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com

ATTENTION

Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.

You are solely liable for the proper operation and maintenance of the equipment.

Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.

Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.

Acknowledge