Adding the right machinery provides real results. Understand the impact at these shops.
Guide Number: SG1466 | Printer Friendly Version | View Safety Disclaimer
Fairly easy task, requires minimal mechanical/electrical experience.
This video will show how to do the blade offset cut. This is one of the first things to do when you change a blade, or experience issues with blade to jet / router alignment. This tells the machine what the offset is when it rotates C from 0 to 180. This number changes with each blade and over time. Anytime you are having issues with cut sizing this is the first step to go to.
Waterjet calibration squares kerf aligned Test Correction Calibration Calibrates Perform
Last updated: April 13, 2022
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
