Adding the right machinery provides real results. Understand the impact at these shops.
Guide Number: SG1091 | Printer Friendly Version | View Safety Disclaimer
Pendant holder mounting relocated for ease of use.
Current position of Cougar pendant holder. Figure 3 Shows new location for holder. Remove bolts to relocate pendant holder.
Drill and tap 2 holes for remounting the Holder in the position shown in Figure 3. The drawbacks may be that the cord will be laying in the mud and the weight of the cord may pull the saw if the gantry brake is not locked.
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
