How To Calibrate Slabsmith on the Pathfinder (4 Videos)

Guide Number: SG1639 | Printer Friendly Version | View Safety Disclaimer

Skill Level

Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

Time to Complete: 45 min

In this new video series we will be going through the steps to calibrate Slabsmith on the Pathfinder. This process will be split into multiple steps to make it easier and include an advanced video for better calibration and photos.

Scan to View on Mobile Device

Calibration Video

This video will be the basic calibration of Slabsmith. For most situations, this will cover what you need to do to re-calibrate.

Setting The Origin Point

This video will demonstrate how to set the origin point or zero point in Slabsmith. This can also be referred to as the 2-stop method.

How to Adjust the Blade To The Stops on CNC Saws and Sawjets

You would use this video to make sure your zero point on your saw table is in the correct position. This will work for Saber, Voyagers, Saberjet, Saberjet XP, Saberjet XP 2 Table, and Javelin machines.

How to Adjust Camera Lighting and Verification Targets

For most people this is not required.

In this video, we will show you how to adjust the settings for the verification targets and changing options to get a better picture within Slabsmith. It is recommended to take a screen shot or photo of your settings prior to adjusting anything so you can always get it back to where it was.

Slab Smith Slabmaker Pathfinder Path Finder Maker Perfectmatch Perfect Match Photo Pic Picture Calibration Calibrate Vein Vien Match Matching Parts Part Snap Calibration 2stop 2nd stop 2nd foot image verification methods two-stop

Last updated: January 22, 2024

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com

ATTENTION

Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.

You are solely liable for the proper operation and maintenance of the equipment.

Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.

Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.

Acknowledge