Park Industries® began providing full-service solutions to the stone industry in 1953. Today, we’ve grown to become North America’s largest manufacturer of stoneworking equipment.
Park Industries® has invested in an infrastructure focused on providing world-class customer services and support. 22% of associates are dedicated to customer support roles.
Moderate task, requires some mechanical/electrical experience.
Time to Complete: 1 hrs
This guide is a two part video series that will explain both the operations and programming for Leathering/ Honing slabs on the Park Industries Voyager XP. Much of this information will be transferrable to the Park Industries Saber CNC saw as well as the Park Industries Titan CNC router – however this guide is specific to what a operator and programmer will want to pay close attention to on the Voyager XP.
Part 1 – Setting up the Voyager for Leathering
Chapters: 0:00 Introduction 0:19 Tooling Types and Information 2:06 Tool Change Location 6:40 Tool Touch Off 8:48 Moving into Safe Location 9:17 Run the Program
Part 2 – Programming the Voyager for Leathering
Chapters: 0:00 Introduction 0:13 Create Tool 1:56 Make Part and Material Geometry 4:10 Apply Cutting information 7:18 Modify the Lead In 8:24 Run in Simulation and Send Code
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
Adding the right machinery provides real results. Understand the impact at these shops.