Lead Settings for Milling out a Sink on a Titan (Video)

Guide Number: SG1754 | Printer Friendly Version | View Safety Disclaimer

Skill Level

Level 1

Fairly easy task, requires minimal mechanical/electrical experience.

Time to Complete: 5 min

Here is how we set the Lead In and Lead outs for cutting out a sink on the Titan. We show an example with using a pod to support the (blank) material drop, and one without a support pod. Watch the “Cut Shape” video    • Using Cut Shape – Basics   for the rest of the settings in the Cut Shape function. Watch the “Cut Hole” video    • Using Cut Holes   to learn how to cut the Pilot and Faucet holes.

Sinks cutouts buttons red toolbox dropping fingerbits millbits

Last updated: August 26, 2024

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391customerservice@parkindustries.com