Park Industries® began providing full-service solutions to the stone industry in 1953. Today, we’ve grown to become North America’s largest manufacturer of stoneworking equipment.
Park Industries® has invested in an infrastructure focused on providing world-class customer services and support. 22% of associates are dedicated to customer support roles.
Moderate task, requires some mechanical/electrical experience.
Time to Complete: 15 min
In this video we go over how to properly program a pocket for a FreePower Charging Station. The settings in this video are the same settings that were used in the “Adding a FreePower Charging Unit with the TITAN CNC Router” video. The same principles can be applied on the Voyager and Saber 5 axis CNC saws as well.
Want to see a sweet little example getting cut and the programming put into action? Watch our Cut This, Polish That episode below!
Pocketing slopping lead in sloping rough and finish Certified bartop s recessed charging charger final depth ramped slope pockets
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
