Park Industries® began providing full-service solutions to the stone industry in 1953. Today, we’ve grown to become North America’s largest manufacturer of stoneworking equipment.
Park Industries® has invested in an infrastructure focused on providing world-class customer services and support. 22% of associates are dedicated to customer support roles.
These videos (Part 1, 2 and 3) illustrate the basic setup and operation of the Integrated Tool Management (ITM) system found on most Park Industries Titan CNC Routers. There are three videos which cover R values, Titan tool library, and ITM Operation.
Search Keywords: Tool Library Offsets Fine Adjust Adjusting Diameter Length Number RPM Speed Feedrate Name IPM Enter Data Comp Removal Measure Amount Add
Part 1 – Understanding R Values and Filling out the ITM Sheets
Part 2 – Inputting Information in the Tool Library; Editing and Deleting Tools; Using the Compensation Calculator
Part 3 – Navigating the ITM Screen; Inputting the R Values; Running The ITM
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.