Adding the right machinery provides real results. Understand the impact at these shops.
Guide Number: SG1674 | Printer Friendly Version | View Safety Disclaimer
In this video, we will discuss how to troubleshoot the vacuum system on your CNC Router. This guide is for Titan 3K and 4 K models, but same process also works with Titan 1K and 2K models.
Possible Alarms are:
700041 – Low Vacuum Warning – Material Vacuum
700033 – Low Vacuum Warning – Main Vacuum
700034 – Warning – Vacuum at Marginal Level
700035 – Warning – Vacuum at Critical Low Level
700036 – NC Cycle Stopped – Vacuum at Critical Low Level
Last updated: March 27, 2024
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
