Adding the right machinery provides real results. Understand the impact at these shops.
Guide Number: SG1662 | Printer Friendly Version | View Safety Disclaimer
Moderate task, requires some mechanical/electrical experience.
This video shows how to use Part Location Pins on your Titan CNC router. We show you the complete process, from creating the tool, creating a program, and placing the pins in the correct locations on the table at the machine.
Chapters: 0:00 Introduction 0:54 Creating the tool in AlphaCam 2:29 Adding the tool in the Titan Library 3:10 Creating the Program 6:30 Running the Program 7:04 Placing the pins
Pin stops, location pins stop bump stops locate pin
Last updated: March 8, 2024
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
