Wiring Quantum Spindle Hour Meter / Sensor – TITAN

Guide Number: SG0022 | Printer Friendly Version | View Safety Disclaimer

Step By Step Video Guide on how to wire the Quantum Spindle Sensor on the TITAN 2000 series.

This is the 1st model of T-coupler Park Industries used.

This is the 2nd model of T-coupler Park Industries used.

This is the 3rd model of T-coupler Park Industries used.

Last updated: May 6, 2022

Need Some Help?

Contact Park Industries® Customer Service
800-785-3391customerservice@parkindustries.com

ATTENTION

Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.

You are solely liable for the proper operation and maintenance of the equipment.

Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.

Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.