Introduction to the Yukon II
Yukon II Safety
Power On
Control Screens
Movements
Cut Cycles
Setting Soft Limits
Kerf
Manual Cutting
Amp Control
Table Rotation
Single Cut
Automatic Operation
Bridge Mitering
Mounting the Blade
Maintenance
Guide Number: SG0825 | Printer Friendly Version | View Safety Disclaimer
Introduction to the Yukon II
Yukon II Safety
Power On
Control Screens
Movements
Cut Cycles
Setting Soft Limits
Kerf
Manual Cutting
Amp Control
Table Rotation
Single Cut
Automatic Operation
Bridge Mitering
Mounting the Blade
Maintenance
Last updated: September 8, 2021
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.