Saberjet High Pressure Schematic.
Video showing how to dial the blade on Voyager, Saber, and Saberjet Series Machines If the machine has suffered a hard enough crash to offset A and C together, you should also consider Checking your head rotations on your saw. The link below will explain these head rotations and how to correct them. https://www.parkindustries.com/service/voyager-machine-offsets/
This video will show how to do the blade offset cut. This is one of the first things to do when you change a blade, or experience issues with blade to jet / router alignment. This tells the machine what the offset is when it rotates C from 0 to 180. This number changes with […]
The purpose of this guide is to walk you through the steps to align your blade to nozzle properly.
This multiple part series will teach you how to use the Slabsmith suite of software that comes as part of the Park Pathfinder system. Modules include: Database Admin, Slabmaker, Perfect Match, Slab Inventory and Jobs/Customers. Video 1: Taking a slab photo using the Slab Maker module. To watch how to calibrate the Pathfinder- we have […]
Video shows how to cone and thread replacement high pressure lines.
This procedure is used for realigning the photo eyes on the Saber, Saberjet Series, Voyager XP and Titan 3000 Series Routers. Alarms: System info 5 Safety photoeye tripped or 700148 Safety Workzone Violation
This video will go through the required steps of leveling your waterjet table slats and machine setup once completed.
Video shows how to clean the sensor for the low flow alarms. Alarm: 1006, 1005, 700232, 700233, Recycled, Fresh, Spindle Ring Water Feed Low, Spindle Center water Feed Low, Fresh Water Low Flow, Recycled Water Low Flow, Insufficient Water Flow
Walk through with a Park Industries Customer Service Rep how to perform an advanced blade touch off for accurate miter and straight cuts. This blade touch off was on a SABERjet XP CNC Sawjet, but the logic applies to all Park Industries saws. TIP OF THE WEEK Park Industries® Stone Fabricators Join our Customer Facebook […]
Walk through with a Park Industries Customer Service Rep how to change your saw’s blade. This blade change was on a SABERjet XP CNC Sawjet, but the logic applies to all Park Industries saws. TIP OF THE WEEK Park Industries® Stone Fabricators Join our Customer Facebook Group! Where Park Industries® customers and operators can connect, […]
Understand how to utilize the predictive capabilities of your predictive waterjet pump to schedule planned maintenance on your time, not during the middle of cutting a job. TIP OF THE WEEK Park Industries® Stone Fabricators Join our Customer Facebook Group! Where Park Industries® customers and operators can connect, network, and grow. Park Industries® Facebook Group […]