Adding the right machinery provides real results. Understand the impact at these shops.
Guide Number: SG1851 | Printer Friendly Version | View Safety Disclaimer
Moderate task, requires some mechanical/electrical experience.
This video is meant to show how to make drawings of the parts. How to measure part lengths and angles for mitering to create a program.
Want to see a sweet little example getting cut and the programming put into action? Watch our Cut This, Polish That episode below!
mitered miters sloped sloping slopping slopped draining drains interaction boxed stone
Last updated: June 20, 2025
Contact Park Industries® Customer Service
800-785-3391 | customerservice@parkindustries.com
Prior to beginning installation, operation, or maintenance, you are advised to carefully read ALL instruction manuals and ALL safety materials and procedures provided with your equipment.
You are solely liable for the proper operation and maintenance of the equipment.
Park Industries® is not responsible for and expressly disclaims liability for any injuries (including death) or damage to the equipment or any other property as a result of improper operation or maintenance of the equipment, as well as failure to comply with the procedures set forth in the equipment’s instructional manual or any other safety materials and procedures. If you encounter any problems or difficulties, you are strongly encouraged to seek professional assistance.
Safety is our number one concern. Should you have any questions don’t hesitate to call our service team at 800-785-3391.
