The HydroClear™ PRO Water Systems from Park Industries® represent a new generation of water recycling. The PRO Series all-in-one design eliminates the need for a separate holding tank saving you precious floor space. It is available in 6 unique models, customizable to meet your shop’s water needs. The HydroClear™ PRO can accommodate up to 170 gallons of water per minute.
All In One
System
Efficient
Recycling
6 Models
Available
Significantly reduce your water bill AND be an environmental steward with a HydroClear™ PRO.
“Industrial activity accounts for about 20% of global water consumption.” – The average fabrication facility can use upwards of 80 gallons per minute to manufacture a countertop. Approximately 1,250 gallons of water is needed to produce a 50 sq ft countertop – equivalent to 20,000 8 oz glasses of water.
The HydroClear™ Systems utilize a closed loop recycling system that will enable you to reduce your water consumption by as much as 90% while being an environmental steward. As a responsible manufacturer, take care of your shop and the environment by installing a HydroClear™ Series Water System from Park Industries®.
Water is a critical element for your machines. Managing water in your fabrication shop is critically important to ensure high efficiency and productivity.
Park Industries® provides a variety of water system solutions to ensure you have consistent, high quality water flow to your equipment. The HydroClear™ PRO solutions will transform your shops water consumption and water quality all while significantly reducing your water bill. The cost savings are huge. With a HydroClear™ PRO system from Park Industries®, you could potentially reduce your water consumption upwards of 90% and your water bill by nearly 70%. It positively Impact your bottom-line as well as the environment.
With 6 unique systems available, the HydroClear™ PRO Series can meet any fabrication production needs, able to handle up to 170 gallons / min.
Park Industries® offers an application engineering analysis of your facility. Through this consultation, Park will assess the current and future needs of your shop and make recommendations accordingly.
The HydroClear™ PRO series from Park Industries® includes an exclusive, 4 chemical system that manages coagulant, flocculent, bromine, and pH levels. Each of the chemicals are monitored and automatically dispensed to ensure that the water is in spec. This hands-free, worry-free system will ensure that you are delivering the high integrity water to your machines. Available on the HydroClear™ PRO Advanced Series.
The HydroClear™ PRO offers an all-in-one system, loaded with new upgrades:
170 Gallons / Min
Select the feature you'd like to learn about or slide through them below.
Controller
Standard
Ideal Shop Production
Small
Gallons / Minute (gpm)
35 gpm
Repress Pump Motor
3 hp
Slurry Pump Motor
1 hp
Sludge Skids
1
L x W x H
54” x 99” x 151”
L x W x H (w/ Ceiling Kit)
54” x 99” 109”
Purge System
2 CFM @ 80 psi
Tank
Galvanized
Weight
2,500 lbs.
Controller
Standard or Advanced
Ideal Shop Production
Small
Gallons / Minute (gpm)
50 gpm
Repress Pump Motor
5 hp w/ VFD
Slurry Pump Motor
1 hp
Sludge Skids
1
L x W x H
74” x 98” x 151”
L x W x H (w/ Ceiling Kit)
74” x 98” x 109”
Purge System
2 CFM @ 80 psi
Tank
Galvanized
Weight
3,200 lbs.
Controller
Advanced
Ideal Shop Production
Medium
Gallons / Minute (gpm)
85 gpm
Repress Pump Motor
5 hp w/ VFD
Slurry Pump Motor
1.5 hp
Sludge Skids
1
L x W x H
74” x 126” x 151”
L x W x H (w/ Ceiling Kit)
74” x 126” x 109”
Purge System
2 CFM @ 80 psi
Tank
Galvanized
Weight
3.500 lbs.
Controller
Advanced
Ideal Shop Production
Medium / Large
Gallons / Minute (gpm)
130 gpm
Repress Pump Motor
Dual 5 hp w/ VFD
Slurry Pump Motor
2 hp
Sludge Skids
2
L x W x H
96” x 141” x 171”
L x W x H (w/ Ceiling Kit)
96” x 141” x 129”
Purge System
2 CFM @ 80 psi
Tank
2 Part Epoxy Paint
Weight
6,000 lbs.
Controller
Advanced
Ideal Shop Production
Large
Gallons / Minute (gpm)
170 gpm
Repress Pump Motor
Dual 10 hp w/ VFD
Slurry Pump Motor
3 hp
Sludge Skids
3
L x W x H
100” x 256” x 136”
L x W x H (w/ Ceiling Kit)
100” x 256” x 136”
Purge System
20 CFM @ 80 psi
Tank
2 Part Epoxy Paint
Weight
9,000 lbs.
Please choose your region and fabrication type below.