How to operate and run a program on the Voyager XP
Ultra-Compact command will apply predetermined Ramp In and Ramp out feed rate and distance to blade cuts. Ultra-Compact also has a feature to do Tension Band cuts.
- Programming
- Software Support
If you lost the Quick Access Tool bar you an import it back in.
This document will show you how to correct backlash or gear mesh on Saber, Saberjet, Saberjet XP and Voyager machines.
- Programming
- Software Support
This will show you how to re-populate the Park Industries Tool Bars in Alphacam. This typically happens after a Windows update has been installed. Alphacam version 2021 and older Uncheck the 1_PIToolbars option and click OK. Alphacam version 2022 Click Miscellaneous Tab and then uncheck 1_PIToolbars.
A step by step guide using Alphacam to edit sinks including finding and saving dxf files from the manufacturers website. Sink Editing Part 1: Sink that downloaded in inches without splines Sink Editing Part 2: Sink that downloaded in millimeters with splines Tags: Template cutout overhang reveal flush convert splines mm
Replacing the Float Drain is simple and can be done with a minimum of tools. Careshould be taken when handling the Float Drain as it is plastic and comprised of many small parts Step 1) Remove the Bottom Cap from the Main Body. Grasp the main body with one hand and with the other hand […]
This video is a step by step guide to creating an open pocket area by using the “Open Pocket Using Boundary” command
To show an example of how to program a Shower pan using the Incremental Router for the drain hole and flange, and the gauge wheel for the Shower pan slope. Creating the sink geometry. Draw the shape for the application (shower pan, drain hole & drain flange) Cutting out the drain. In this example we […]
An example of how to program a profiled edge using the Saw on the Saber, SaberJet and Voyager. All settings are examples and may not be the same for all applications. This guide covers profiling with a Saw Blade. If profiling an arc on the Voyager and Saber you will need FLAT END TOOLS such […]